Danfoss Plug-in display, type MBD 1000 for pressure/temperature transmitters with output 4-20 mA
Danfoss MBD 1000 provides you with a simple and effective solution for local monitoring of actual pressure and temperature. A microprocessor controlled plug-in display that can be universally applied to all MBS, AKS and MBT transmitters with a 4-20 mA output and DIN 43650 plug. The MBD 1000 is simply inserted between the transmitter and its connector by means of the integral DIN cubic plug adaptor. - No need for auxiliary voltage source - Simple to attach and adjust
Features • Polarity protected • No auxiliary energy source required • Can be tilted to any position • High accuracy and minimal temperature drift • Easy installation • Instant monitoring of transmitter • CE approved
Technical data Input signal: 4 - 20 mA (2-wire) Max. allowed input current: 40 mA Reverse voltage protection: Polarized installation Voltage drop: Approx. 3 V Display: 10 mm high LCD-display Display range: Start and end value freely programmable Maximum display value: 9999 Minimum display value: -1999 Decimal point: Any position Measuring accuracy: 0.2% ± 1 digit Temperature drift: 100 ppm / °C Measuring interval: Approx. 3 measurements / sec. Filtering: Selectable in 3 stages Nominal temperature: 25°C Ambient temperature: 0 to 50°C Humidity: 0 to 80% RH (non condensing) Electromagnetic compatibility: According to EN61000-6-2 and EN61000-6-3 additional error: < 1% Housing Dimensions: ABS. Front screen made of polycarbonate 48.5 x 48.5 x 35.5 mm (L x W x D) Connection: DIN 43650 adaptor IP rating: IP65