The Danfoss contactor programme CI 110-180 consists of one frame size with three NO main contacts and one auxiliary contact block with one NO and one NC auxiliary contact. Spare contacts are available and by maintenance, the moveable system blocks when removing the chamber. By replacing contacts, wire separation from terminals is not necessary. A long electrical lifetime makes the CI 110-180 contactors suitable for operation of all kinds of electrical loads in modern industry. Combined with a thermal overload relay or an electronic motor protection relay, the contactor switches and protects induction motors against overload and asymmetric load. A wide range of clip-on aux. contacts, timers, surge suppressors, mechanical interlock and marking plates makes the CI 110-180 programme very flexible and suitable both for OEMs and panel builders.
• Compact design • Screw mounting • Power range 55 kW to 90 kW • Basic modules with aux. contacts (1 NO + 1 NC) • For ac coil voltages
Type Code No Weight AC-3 power AC-3 power AC-3 Ie AC-1 Ith AC-1 Ithe Coil volt.50 Hz Coil volt.60 Hz [kg] 220-240 V 380-1000 V open enc CI 110 037H308122 3.98 32.0 kW 55.0 kW 110.0 A 160.0 A 135.0 A 110 V 127 V CI 110 037H308131 3.98 32.0 kW 55.0 kW 110.0 A 160.0 A 135.0 A 220 - 230 V 260 V CI 110 037H308137 3.98 32.0 kW 55.0 kW 110.0 A 160.0 A 135.0 A 380 - 400 V 440 V CI 141 037H333916 3.92 45.0 kW 75.0 kW 140.0 A 250.0 A 210.0 A 24 V 28 V CI 141 037H333922 4.17 45.0 kW 75.0 kW 140.0 A 250.0 A 210.0 A 110 V 127 V CI 141 037H333931 3.98 45.0 kW 75.0 kW 140.0 A 250.0 A 210.0 A 220 - 230 V 260 V CI 141 037H333937 3.98 45.0 kW 75.0 kW 140.0 A 250.0 A 210.0 A 380 - 400 V 440 V CI 180 037H308222 4.16 55.0 kW 90.0 kW 180.0 A 250.0 A 210.0 A 110 V 127 V CI 180 037H308231 4.20 55.0 kW 90.0 kW 180.0 A 250.0 A 210.0 A 220 - 230 V 260 V CI 180 037H308237 4.14 55.0 kW 90.0 kW 180.0 A 250.0 A 210.0 A 380 - 400 V 440 V